How To Set Up A Tetra Whisper Filter

aquarium with many fish and natural plants.Tropical fishes.aquarium with green plants

How to Troubleshoot a Tetra Whisper Filter

Prototype Credit: iancucristi/iStock/GettyImages

If you program to fix a successful freshwater or saltwater aquarium you need to make certain you have the correct filtration. A powerful filter is an absolute must for any aquarium, and for years Tetra Whisper filters have been a popular selection for aquarium hobbyists. These filters can provide years of trouble-free service, simply it is important to know how to solve common problems with the filters before they become major issues.

Whisper Filter Troubleshooting

Step 1

Unplug your Tetra Whisper filter from the outlet and carefully pull it free of the aquarium. The dorsum of the filter will be filled with water, so be certain to have a bucket handy to go on whatsoever water from spilling onto your carpet or floors. Place the filter in the bucket, making sure that the cord does not get moisture.

Step 2

Examine the intake strainer and make sure it is not broken or damaged. If the strainer is damaged it could allow gravel and debris to get into the motor, and that could severely impairment the filter. In improver a faulty intake strainer could allow small fish to be sucked into the tube, and then exist certain to replace the strainer if it is cracked or damaged.

Pace 3

Advisedly remove the intake strainer from the intake tube. Bank check the tube for droppings and clear anything you notice. Remove the intake tube from the impeller and and then open the impeller to examine it for debris or other contaminants. Use a flexible aquarium brush to clean the impeller motor. Reattach the intake tube and intake strainer.

Stride 4

Pour the water out of the dorsum of the filter, being careful that no gravel gets into your drain. Exist sure to close the drain in your sink before pouring out the water, and exist certain to remove whatsoever gravel earlier letting the water down the sink.

Step 5

Pull out the old filter and supercede it with a fresh new one, then carefully place the filter dorsum on your aquarium. Fill the back of the filter up with water that is roughly the same temperature as the water in the tank. Afterward the back reservoir is filled to the top, plug the filter in and listen for the motor. After a couple seconds the motor should come on and yous should meet water begin to flow. If water is not flowing the motor may be damaged. Bank check your owner's transmission to decide how to order the replacement parts yous will demand to repair the filter.